Loading ...
Loading ...
Loading ...
22 | NORD GRAND USER MANUAL OS V1.5X
10
MENUS
Any settings that are made in the System, Sound and MIDI menus will
take immediate effect, and will be stored until they are changed again.
M The Local Control MIDI setting is an exception and will always
revert to “On” when the Nord Grand is powered up.
Enter a menu by holding SHIFT and pressing SYSTEM, SOUND or
MIDI (Program buttons 1, 2 and 3). Menus are navigated with the
on-screen3 and 4 soft buttons and settings are changed with the
PROGRAM dial. Soft buttons are also used to access additional settings,
where applicable. Exit a menu by pressing EXIT (Shift).
SYSTEM MENU
1 - MEMORY PROTECT
The memory protection setting is On when a Nord Grand leaves the
factory, preventing accidental overwriting of programs. Setting this to
Off enables Store operations. Menu settings and Live programs are not
affected by this setting.
Range: On (default), Off
2 - NUMPAD PROGRAM SELECT
Program selection can be set up to work in two distinct ways. By
default, the standard “page based” mode is used, but selection can also
be done by using “numeric pad” input. With NumPad Program Select
turned On, the Program 1-5 buttons are used for numeric input, giving
access to all 25 programs (11-55) within the current bank with two but-
ton presses. With NumPad Program Select turned Off the 1-5 Program
buttons correspond to the five programs within the current page.
Range: Off (default), On
3 - GLOBAL TRANSPOSE
This setting allows for transposing the entire Nord Grand in semitone
steps. This setting will be added to any on-panel transpose value stored
with a program.
Range: +/- 6 semitones (default value is “none”)
4 - FINE TUNE
Fine Tune can be used to fine tune the pitch of the Nord Grand in finer
increments.
Range: +/- 50 Cents (+/- half a semitone). Default value is “0”
5 - OUTPUT ROUTING MODE
In Stereo mode, all sounds are sent to both audio outputs. When set to
Piano:L Synth:R, Piano sounds are sent to the Left output and Sample
Synth sounds to the Right.
Range: Stereo (Default), L:Piano R:Synth
6 - SUSTAIN PEDAL TYPE
This allows you to select the type of pedal connected to the SUSTAIN
PEDAL jack, in case the functionality of the pedal is reversed (when the
pedal is up, sustain is on and vice versa). The Auto setting can automati-
cally determine the type of a connected pedal.
Range: Triple, Open, Closed, Auto (Default)
7 - CONTROL PEDAL
TYPE
The Nord Grand accepts many of the most commonly available control
pedals through its CONTROL PEDAL input. Select a setting here that
matches the pedal being used.
If a connected pedal is operated while in this menu, a percentage
indicating the range of the connected pedal is displayed.
Range: Roland EV7 (default), Yamaha FC-7, Korg, Fatar/Studiologic
GAIN
This setting allows for adding some gain to the pedal signal. This can be
useful if an attached pedal does not reach its maximum level or setting.
Range: 1 - 10
8 - VERSION AND MODEL INFO
The Version and model info menu page shows the full version number
of the currently installed OS (Operating System) and, when turning the
Program dial, hardware information for the instrument.
Use the Program dial to switch between Version and Model info
SOUND MENU
1 - PIANO PEDAL NOISE LEVEL
Sets the level of the dynamic Pedal Noise feature which can be turned
on for pianos that support it, if a Nord Triple Pedal is connected to the
Nord Grand.
Range: +/- 6 dB (0 dB default)
2 - PIANO STRING RES LEVEL
Sets the level of the String Resonance feature that can be turned on for
selected pianos (acoustic Med, Lrg and XL sizes).
Range: +/- 6 dB (0 dB default)
Loading ...
Loading ...
Loading ...