Loading ...
Loading ...
Loading ...
14 WWW.SENIXTOOLS.COM
CLEANING AND STORAGE
The product comes in a package that protects
it against damage during shipping.
Keep the package until you are sure that all
parts have been delivered and the product
is function properly. Recycle the package
afterwards.
Old products are potentially recyclable
under Waste Electrical and Electronic
Equipment(WEEE) Directive(2012/19/EU)
and do not, therefore, belong in your
household rubbish. You are requested to
assist us and our contribution to saving
resources and protecting the environment
by handing in this appliance at an equipped
collection centre(if there is one available)
CLEANING
WARNING:
Always switch the product off, and disconnect the
unit from the power supply and let the product cool
down before performing inspection, maintenance and
cleaning work!
Use a small brush to clean the outside of the unit. Do
not use strong detergents. Household cleaners that
contain aromatic oils such as pine and lemon, and
solvents such as kerosene, can damage plastic. Wipe
off any moisture with a soft cloth.
Inspect the product before and after each use for worn
and damaged parts. Do not operate it if you nd worn
and damaged parts.
NOTE:If the cutting blade is blocked by foreign objects
during the operating, stop the product, wait for the
cutting blade stops entirely, remove the foreign objects
and clean the cutting blade.
WARNING:
Only perform repairs and maintenance work according
to these instructions! All further works must be
performed by a qualied specialist!
STORAGE
1. Clean the product as described above.
2. Store the product and its accessories in a dark, dry,
frost-free, well-ventilated place.
3. Always store the product in a place that is
inaccessible to children. The ideal storage
temperature is between 50 °F(10 °C) and
86°F(30°C).
4. We recommend using the original package for
wstorage or covering the product with a suitable cloth
or enclosure to protect it against dust.
TRANSPORT
1. Clean the product as described above.
2. Always carry the product by its handle.
3. Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
4. Secure the product to prevent it from slipping or
falling over,damage or injury.
Loading ...
Loading ...
Loading ...