Loading ...
Loading ...
Loading ...
Safety information
4
Before switching on the appliance for the first time read the following safety hints!
Before first use
Make sure there is no transport damage.
Remove all packaging and keep out of children´s reach.
Wait at least two hours before installing the appliance in order to ensure the
refrigerant circuit is fully efficient.
Handle the appliance always with at least two persons because it is heavy.
Installation
The appliance should be placed in a well-ventilated place. Ensure a space of at
least 2 cm above and around the appliance.
Never place the appliance in a damp area or location where it might be splashed
with water. Clean and dry water splashes and stains with a soft clean cloth.
Do not install the appliance in direct sunlight or in the near of heat sources(e.g.
stoves, heaters).
Install and level the appliance in an area suitable for its size and use.
WARNING:Keep ventilation openings in the appliance or in the in-built structure
clear of obstruction.
Make sure that the electrical information on the rating plate agrees with the power
supply. If it does not, contact an electrician.
Connect the appliance to the electrical supply （220V-240V 50Hz) with the fitted
plug and lead .
Abnormal voltage fluctuation may cause the appliance to fail to start, or damage to
the temperature control or compressor, or there may be an abnormal noise when
operating. In such case, an automatic regulator shall be mounted.
Do not use multi-plug adapters and extension cables.
WARNING:Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
WARNING:When positioning the appliance, ensure the supply cord is not trapped
or damaged.
Loading ...
Loading ...
Loading ...