Loading ...
Loading ...
Loading ...
5
INSTRUCTIONS FOR USE
1. Ensure that the unit is unplugged before filling with water. Fill with water to the fill line located on the
inside of the tub.
CAUTION: Do not fill water over the fill line.
NOTE: The footbath will not heat cold water. For a warm water massage, fill the unit with warm water.
2. Plug the unit into a 120-volt household outlet.
3. The footbath comes with 3 interchangeable foot massage attachments (Fig. 3). Place the attachment
that you desire into the center node slot (Fig. 1). Replace unused massage attachments on front of
footbath (Fig. 2).
4. Press power
button once to turn on bubbles (Fig. 1).
5. While seated, place your feet in the footbath.
6. Enjoy a deep soothing massage by sliding feet back and forth over the raised nodes on the footbath
floor or over center massage node.
7. Enjoy a dry foot massage by sliding feet back and forth over the raised nodes on the splash guard.
8. When finished, press power
button once.
9. To empty: First, unplug the unit. Tip the unit, allowing water to pour out along the rear corner of the
footbath. DO NOT pour water over the power button (Fig. 1).
NOTE: DO NOT hold or carry the unit by the removable splash guard.
CAUTION: To avoid injury and irreparable damage, always remain seated when using this footbath.
Never stand on or in the unit.
CAUTION: THIS UNIT CAN ONLY RUN WITH WATER IN IT. DO NOT USE WITHOUT WATER.
Loading ...
Loading ...
Loading ...