Loading ...
Loading ...
Loading ...
24 - INSTALLATION 91477A899/A
1
Minimum distance from side walls or other
flammable material.
2
Minimum cabinet width (=A)
Appliance dimensions
Levelling the appliance
The appliance must be level on the floor in order
to ensure greater stability.
After making the gas and electrical connections,
screw on the four legs supplied with the
appliance (1). Screw or unscrew the feet at the
bottom until the appliance is stable and level on
the floor (2).
Assembling the upstand (on some models
only)
The upstand must always be positioned and
secured correctly on the appliance.
1. Unscrew the two nuts (B) on the back of the
hob.
2. Position the upstand on the hob, taking care
to align the pins (C) with the holes (D).
3. Fasten the upstand to the hob using a
screwdriver to tighten the screws (A).
Fastening to the wall
The symbols above indicate the danger if the
anti-tip are not installed devices and the
importance of their correct installation.
L
2
600 mm
Position of gas connection
Position of electrical connection
See General safety instructions.
The upstand provided is an integral part
of the product. It must be fastened to the
appliance prior to installation.
The anti-tip devices must be installed in
order to prevent the appliance from
tipping over.
Loading ...
Loading ...