Loading ...
Loading ...
Loading ...
INSTALLATION - 2391477A899/A
e
spindle clockwise all the way. Lubricating the gas cocks
Over time the gas cocks may become difficult to
turn and get blocked. Clean them internally and
replace the lubrication grease.
Burner and nozzle characteristics tables
The nozzles not provided are available at Authorised Service Centres.
Positioning
Depending on the type of installation, this
appliance belongs to classes:
The appliance can be placed against walls that
are higher than the work surface, at a minimum
distance of X mm from the side of the appliance.
Any wall units installed above the appliance’s
worktop must be positioned at least Y mm from
it.
Appliance overall dimensions
Following adjustment to a gas other
than the one originally set in the factory,
replace the gas setting label on the
appliance with the one corresponding
to the new gas. The label is inserted
inside the nozzle pack (where present).
Lubrication of the gas cocks should be
performed by a specialised technician.
Natural Gas G20 - 20 mbar AUX SR UR-3c
Rated heating capacity (kW)
1.05 1.8 3.5
Nozzle diameter (1/100 mm)
72 97 134
Pre-chamber (printed on nozzle)
(X) (Z) (F3)
Reduced flow rate (W)
400 500 1600
LPG G30/31 - 30/37 mbar AUX SR UR-3c
Rated heating capacity (kW)
1.05 1.8 3.5
Nozzle diameter (1/100 mm)
50 65 94
Pre-chamber (printed on nozzle)
--
Reduced flow rate (W)
400 500 1600
Rated flow rate G30 (g/h)
76 131 255
Rated flow rate G31 (g/h)
75 129 250
See General safety instructions.
Class 1 Free-standing
Class 2 - subclass 1 Built-in
X 150 mm
Y 750 mm
If a hood is installed above the
appliance, refer to the hood instructions
manual to make sure the correct
clearance is left.
A 600 mm
B 600 mm
C
1
min. 150 mm
D 900 ÷ 915 mm
H 750 mm
I 450 mm
LL
HH
II
CC CC
AA
BB
DD
Loading ...
Loading ...
Loading ...