Loading ...
Loading ...
Loading ...
notes:
converting natural gas to propane
Before beginning, the unit must be completely disconnected from any gas supply.
You will need: One (1) XOFLPKIT, conversion kit, included*
Adjustable wrench
Pipe Dope
So
* Kit packed inside fire pit
apy water solution to test for leaks
1. Tilt the burner plate up
to reveal the gas connections
2. Disconnect the flare fitting
below the brass orifice from
from the flex tube.
3. Unscrew the brass orifice
from the pipe going up to the
burner.
4. Apply a thin layer of pipe
dope to the threads -
Be careful not to get pipe
dope inside the pipe.
5. Thread on the new brass
orifice supplied with the
XOFLPKIT onto the pipe nipple
and tighten with the wrench.
6. Attach the flex tube removed
in step 2 to the flare fitting and
tighten with the wrench.
(DO NOT USE PIPE DOPE on
flare fittings)
7. Feed the 10’ regulator hose
from the LP tank through the
hole provided in the base of the
unit and connect the flair fitting
to the gas valve tightening it
with the wrench.
Before replacing the burner plate the
system must be checked to ensure all fittings are leak tight.
1
2
3
4
5
7
8
6
THIS CONVERSION CAN ONLY BE COMPLETED BY A LICENCED, INDUSTRY PROFESSIONAL
Loading ...
Loading ...
Loading ...