Loading ...
Loading ...
Loading ...
6
1. Attach the power cable to the back of the machine, plug into a three-prong outlet, and turn the
switch on.
• The unit will conduct an automatic self-diagnostics to ensure accurate counts.
• After five seconds of the counting wheels spinning, the screen will display “0”.
• If there is a problem, the preset display will show an error code. (See ERROR CODE
DISPLAY AND SOLUTIONS – LOCATED ON PAGE 8.)
2. Before counting, select counting settings that are related to your counting needs:
• Add Mode: The ADD mode displays the cumulative total of all bills counted. To turn the
ADD mode on, press the “ADD” button.
• Auto and Manual Start Mode: This unit is preset to automatically start counting bills once
placed into the hopper. To change to the manual start mode, press and hold the “START”
button. The OFF LED light will flash on the control panel. To return to automatic setting,
press and hold the “START” button. The ON LED will flash on the control panel.
• Batch Mode: The machine is preset to common counting mode, which automatically
counts all bills placed into the hopper. To count bills in batches, press the “BATCH”
button. The batch count amount will automatically start at 100.
• Press the “BATCH” button again to set the amount to 50.
• Press the “BATCH” button again to set the amount to 20.
• Press the “BATCH” button again to set the amount to 10.
• Press the “BATCH” button again to set the amount to 1.
• Press the “BATCH” button again to turn the batch mode off.
• Use the “+” and “-” buttons to increase and decrease the quantity by 1. Press
the “START” button to clear the count number in Batch mode.
PRODUCT OPERATION
Loading ...
Loading ...
Loading ...