Loading ...
Loading ...
Loading ...
7
ASSEMBLY INSTRUCTIONS
3
B
H
High Pressure Hose Assembly
Connect the other end of high pressure hose (B) to
spray gun (H) by screwing collar over gun inlet. Hand
tighten (turning clockwise) until tight. Hose is now se-
curely attached to the spray gun.
Note: High pressure hose (B) is tted to the hose reel
and ready to use. It only needs to be attached to the
spray gun (H).
4
B
H
To release the hose (B) from spray gun (H), turn black
collar counterclockwise. Remove gun.
5
H
H
Lock
Unlock
I
I
Locking Spray Gun (before Lance installation)
To lock the trigger of the spray gun (I), aim the gun
away from you and push the lock button from right to
left. After doing so, squeeze or pull the trigger to make
sure it is locked and will not move. Always leave lock
button in locked position when not in use. This ensures
the gun is in “safe” mode until it is ready for use.
Lance Installation
While spray gun (H) is in the locked position, insert
lance (F) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove
turn counterclockwise.
2
1
6
F
H
Loading ...
Loading ...
Loading ...