Troy-Bilt 12AD566N766 Troybilt party mower

User Manual - Page 10

For 12AD566N766.

PDF File Manual, 20 pages, Download pdf file

Loading ...
Loading ...
Loading ...
SECTION4: KNOWYOURLAWNMOWER
Read this owner's manual and safety rules before operating your lawn mower. Compare the illustrations in Figure
10 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this
manual for future reference.
WARNING: The operation of any lawn mower can result inforeign objects being thrown intothe
operator's eyes thus causing severe eye damage. Always wear safety glasses while operating the
mower, or while performing any adjustments or repairs on it.
DriveControlHandle
This mower is equipped with Smart Speed TM
transmission which enables the drive control
handle to adjust the mowing speed automatically
with your walking. The drive control handle is
located on the upper handle. Push the handle
forward to engage drive, pull it backwards to stop.
The farther the handle is pushed forward, the
faster the mower will propel.
BladeControlHandle
The blade control handle is located on the upper
handle of the mower. The blade control handle
must be depressed in order to operate the unit.
Release the blade control handle to stop the
engine and the blade.
i_ ING: The blade control handle is
WARN
a safety device. Never attempt to bypass its
operations or alter itin any way.
StarterRope
The starter rope is attached to the handle. Stand
behind the unit and pull the starter rope to start the
unit.
GrasscatcherBag
The grass bag is used for collecting grass
clippings. Attach it to the mower for this purpose,
but remove it when the intention is to mulch the
grass.
MulchingPlug
The mulching plug is used only for mulching
purposes. Instead of collecting the grass clippings
in a grass catcher, your mower has the option of
recirculating the clippings back to the lawn. This is
called mulching.
CuttingHeightAdjustmentLever
These levers are located on each wheel and they
are used to adjust the cutting height. All four levers
have to be at the same relative position to ensure
uniform cut.
Drive Control Handle
-- Blade Control Handle
Starter Rope
-- Grasscatcher
Lower Handle
Cutting Height
ustment Levers
Side-Discharge S
Chute
Mulchin
Plug
NOTE: For engine controls, refer to the engine manual
The left rear wheel has been left out of the
picture for clarity.
Figure 10
10
Loading ...
Loading ...
Loading ...