Loading ...
Loading ...
Loading ...
35
www.spirittness.com
TROUBLESHOOTING
No Display on Console
1. Press any key to bring the console to ‘Quick Start’
mode.
2. Ensure that the batteries are installed properly in
the Console and Transmitter. If they are, install
fresh batteries.
No Heart Rate signal displayed
1. Ensure that your chest strap is worn correctly, and
that there is moisture under the electrodes of the
chest strap.
2. Relocate the bike away from any equipment that
could potentially interrupt the radio frequency
signal, such as a DVD player or television, etc.
RPM or HR does not change
1. Press ‘MODE key’ repeatedly to toggle between
SPEED (SPD), DISTANCE (DIST), TIME (TIME) and
CLOCK (CLK) values.
2. Press and Hold ‘SET key’ repeatedly to clear past
measured value or go into setting and exit.
Cadence number jumps high or low
1. Separate bikes that may be paired to the same
console code and are cross-talking, or simply run
transmitter pair stage again on the bike.
2. Relocate the bike to a different part of the room,
away from any RF interference areas.
Heart Rate signal gets interrupted or drops out
1. Ensure that there is a minimum distance of 36
inches between bikes.
2. Verify that your chest strap is secure and that the
electrodes are making contact with your chest at
all times.
CONSOLE BATTERY INSTALLATION:
1. Remove the battery cover from the back of the
computer.
2. Insert 2 AAA batteries into the battery com-
partment and reinstall the battery cover.
3. When battery voltage is low, the ‘Low bat-
tery’ indicator will show up on the Console
display.
Loading ...
Loading ...
Loading ...