Loading ...
Loading ...
Loading ...
ThecableTVsignal intoyour homemay
be asingle cable(75ohm)ormay include
a cableBox.In eithercase,theconnection
tothe TVis easy.
if your Cable TVsignal comes directly
via a75 ohm coaxial cable, use the foll-
owing steps:
I Connect theCable TVsignal tothe
75 OHM ANTENNA iNPUT jack on
the rear of the TV. Screw it down
finger tight.
Plug theTV's power cord into a
power outlet and turn on theTV, Set
TV/CATV to CATV as detailed in page
11.
Refer toAUTO SEARCH to setup
your available channels. Details are
on page 12.
Cable TV company
l
o o
i
\
If you have a Cable Box, use the follow-
ing steps.
ConnecttheCableTVsignaltothe
IN jack on the Cable Box.
Connect the separate coaxial cable
to the OUT jack on the Cable Box
and to the 75 OHM ANTENNAINPUT
jack on the rear of theTV.
Plug the TV's power cord into a power
outlet and turn on the TV, Set TV/CATV
to CATV as detailed in page 11.
Cable TV company
iiiiiiiiiiiih
4 Set theTV to channel 3 or 4 (the same
as the Channel3/4 switch on yourCable
Box if applicable). Change channels at
the Cable Box.
i
An RF coaxial cable (to con-
nect the Cable Box to the TV)
may be supplied by the Cable
TV company. It is not supplied
with the TV but it is available
from Magnavox or electronics
retailers.
You can connect a Satellite
Receiver the same way you
would connect a Cable Box.
75 OHM
ANTENNA
iNPUT
Your Cable Box may have separate Audio and Video Out jacks
instead. If so, use audio and video cables to connect the AUDIO
/VIDEO OUT jacks of the Cable Box to theAUDIO/VIDEO IN2
jacks on the rear of theTV.
Press theTV/AVon the remote control to set the TVto theAV2
channel. Change channel atthe Cable Box.
Loading ...
Loading ...
Loading ...