Loading ...
Loading ...
Loading ...
7
2. Fill a small jug with milk.
3. Hold the jug under the steam nozzle with the nozzle beneath the surface of the milk.
4. Turn the steam/hot water control counterclockwise. The further counterclockwise you turn
the control, the more steam is produced.
5. When the milk is heated to your satisfaction, turn the steam/hot water control clockwise to
the o (A) position.
6. Clean the steam nozzle.
Frothing milk
1. Follow steps 1 and 2 under ‘Steaming milk’. Use cold milk from the refrigerator for best
results.
2. Hold the jug under the nozzle as above and open the steam/hot water control as desired.
3. To make frothy milk with large bubbles, hold the nozzle just under the surface of the milk
and make circular motions with the jug as steam is released (Fig. L).
4. To make frothy milk with small bubbles (micro foam), hold the nozzle fully under the surface
of the milk and make circular motions with the jug as steam is released (Fig. M).
5. Turn the steam/hot water control clockwise to the o (A) position when you are nished.
6. Clean the steam nozzle.
Hot water
1. Move the control to the on position (F). The gauge will move to the preheat (C) position as
the unit heats up. Once the temperature is correct, the gauge will move to the (B) position.
2. Hold a suitable container under the steam nozzle.
3. Turn the steam/hot water control fully counterclockwise to the D/E position.
4. Hot water will come out of the steam nozzle for up to 90 seconds.
5. Turn the steam/hot water control clockwise to the o (A) position when you are nished.
Heating drinks
• Follow the directions under ‘Steaming milk’ but holding the cooled drink under the steam
nozzle instead of the milk.
Cleaning the steam nozzle after each use
1. Clean the steam nozzle and the swivel arm immediately after every use.
2. Immerse the steam nozzle in a cup of clean water.
3. Turn the steam/hot water control counterclockwise. Let steam escape into the clear water
for several seconds.
4. Repeat the process several times if necessary.
5. Finally, carefully remove the steam nozzle and wipe it and the swivel arm with a clean damp
cloth before replacing it.
TIPS
• Place your espresso cups on top of the unit where they will be gently warmed.
• To get a hotter espresso, warm the portalter before use. Fit the sieve into the portalter, t
the portalter and run the brewing process for 5-10 seconds to heat the lter up. Then,
remove the portalter and use it as normal to make espresso. Be aware when handling the
portalter and sieve that they will be hot after doing this.
• After several uses of the steam function, the temperature of the unit can become high and
this will prevent further brewing until the machine has cooled a little. You can use the hot
water function to cool the machine more quickly.
Loading ...
Loading ...
Loading ...