Loading ...
Loading ...
Loading ...
1. Verify that the power cord is
disconnected from the outlet.
2. Disconnect the hose from the vacuum.
3. Undo the latches and remove the
powerhead from the collection tank.
Place powerhead on a soft, clean
surface upside down.
4. Clear all dirt or debris from the
collection tank and hose into a proper
waste container.
5. Clean or replace the filters.
6. Check the hose, accessories, and power
cord to verify that they have not been
damaged.
7. Place the powerhead back on collection
tank and secure latches.
IMPORTANT!
Clean or change the filter
regularly for best performance.
ALWAYS
USE THE REUSABLE CLOTH FILTER FOR
DRY VACUUMING.
If the machine is used
without the reusable cloth filter, the motor
will burn out and the warranty will be
voided. Always keep spare filters on hand.
NOTE:
The filters included are made
of high-quality materials designed to
stop small dust particles. The reusable
cloth filter should be used for dry pick-
up only. A dry reusable cloth filter is
necessary to pick up dust. If the reusable
cloth filter is wet, it will clog quickly and
be very difficult to clean. Handle the filter
carefully when removing it for cleaning
and replacing it. Check the filters for tears
or small holes. A small hole can let dust
pass through and out of the filter. Do not
use a filter with holes ortears; replace it
immediately.
- 17 -
VACUUM MAINTENANCE AND CARE
WARNING
Always disconnect the plug from the
outlet before removing the powerhead
from the collection tank.
EMPTYING THE COLLECTION TANK
Loading ...
Loading ...
Loading ...