Loading ...
Loading ...
Loading ...
1. Verify that the power cord is
disconnected from the outlet.
2. Make sure the collection tank is empty
before using as a blower. Clear all dirt
and debris from the hose and collection
tank.
3. Remove the hose from the vacuum port.
4. Insert the larger end of the hose into
the blower port on the back of the
powerhead.
5. Choose the desired accessory and insert
onto the end of the hose or extension
wand.
6. Verify that the on/off switch is in the ‘O’
OFF position before plugging the power
cord into the power outlet. Plug the
power cord into the outlet.
7. Before turning on the vacuum, firmly
hold the loose end of the hose. Turn the
motor on by flipping the switch to the ‘I’
ON position.
8. Once you have completed blowing, flip
the on/off switch to the 'O' OFF position
and unplug the power cord from the
outlet.
- 16 -
BLOWER OPERATION
This Wet/Dry Vacuum has blowing capabilities.To use the blower feature, follow the
instructions listed below.
WARNING
ALWAYS WEAR SAFETY GOGGLES
COMPLYING WITH ANSI Z87.1 (OR
INCANADA, CSAZ94.3) BEFORE USING
BLOWER.
CAUTION
KEEP BYSTANDERS CLEAR FROM
BLOWING DEBRIS.
WARNING
WEAR A DUST MASK IF BLOWING
CREATES DUST THAT MIGHT
BEINHALED.
Loading ...
Loading ...
Loading ...