Loading ...
Loading ...
Loading ...
Basic adjustment settings
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
On Detects, analyzes, converts film source
Off Normal viewing mode
., "Film Mode" does not function when you set the "AV Mode"
to "Game".
"Film Mode" is not selectable when channel display shows
an input resolution of 480P, 720P, or 1080P.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow
Standard
Fast
Off (2D}
For still images
Normal adjustment
For moving images
For Game Mode
You can adjust the sound quality to your preference
with the following settings.
VOL CH
FREEZE MENU
0 O
_ R_N
-- FAVORITE CH --
6)@@@
Press MENU to display the MENU screen, and
then press _1/1_ to select "Audio".
., 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On For viewing in monochrome
Off Normal color
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of + 16 and a minimum of 16.
Max. 15 through + 16
IVlin. 16 through + 15
Press A/Y to select a specific adjustment
item.
Press 41/1_ to adjust the item to the desired
level.
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio from Decrease audio
the right speaker from the Deft
speaker
Press MENU to exit.
The range of OPC settings are active only when the OPC is
set to On.
., The ma_ximum setting cannot be set to a smaller number
than the minimum setting.
., The minimum setting cannot be set to a bigger number
than the me_ximum setting.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
®- 28
., Audio menu is grayed out when Output Select is set to
"Variable".
., For resetting all Audio adjustment items to the factory
preset values, press A/T to select "Reset", press ENTER,
press 4/1_ to select "Yes", and then press ENTER.
Loading ...
Loading ...
Loading ...