Loading ...
Loading ...
Loading ...
- 6 -
Electrical Data
*NOTE: Two separate conduit connections must be made: each connection carries one-half of the
rated load.
**NOTE: Two separate conduit connections must be made: one connection carries 16.2 KW, the other
connection carries 10.8 KW.
OPERATION
The griddle and its parts are hot. Use care when operating, cleaning
or servicing the griddle.
Disconnect power supply and follow lockout / tagout procedures
before cleaning and servicing the appliance.
BEFORE FIRST USE
Remove all packing material and protective plastic from the surfaces of the unit. Before
leaving the factory the griddle cooking surface is coated with vegetable oil as a rust
inhibitor. Remove this film when the griddle plate is being cleaned prior to its first cooking
use. Heat the griddle to 200-300°F to loosen and melt the coating, then clean the surface
by adding water or a non-corrosive, grease dissolving commercial cleaner, following the
manufacturer’s directions. Scrape the oil residue from the plate with a griddle scraper.
Rinse thoroughly and wipe dry with a soft clean cloth. Clean all accessories.
STANDARDVOLTAGES‐208VOLTSOR240VOLTS50/60Hz.‐SINGLEORTHREEPHASE
480VOLTS50/60Hz.‐THREEPHASEONLY
TOTALTOTAL3PHASELOADINGNOMINALAMPSPERLINEWIRECONN.
MODELNUMBERCONN.KWKWPERPHASE3PHASE1PHASE
KWPERPERCONN.*208VOLT240VOLT480VOLT208240
CONNX‐YY‐ZX‐ZXYZXYZXYZVOLTVOLT
HEG24E/WEG24E10.810.85.45.40.022.545.022.519.539.019.59.719.59.751.945.0
HEG36E/WEG36E16.216.25.45.45.445.045.045.039.039.039.019.519.519.577.967.5
HEG48E/WEG48E21.621.610.85.45.467.467.445.058.558.539.029.229.219.5103.890.0
HEG60E/WEG60E**27.016.25.45.45.445.045.045.039.039.039.019.519.519.577.967.5
10.85.40.05.445.022.522.539.019.519.519.59.79.751.945.0
HEG72E/WEG72E*32.416.25.45.45.445.045.045.039.039.039.019.519.519.577.967.5
16.25.45.45.445.045.045.039.039.039.019.519.519.577.967.5
Loading ...
Loading ...
Loading ...