Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
21
. . .without partition wall
If the refrigeration appliances are to be
installed next to each other without a
partition wall between them, they will
need to be joined together with the
side-by-side installation kit. In addition,
you must install the side panel heater to
prevent condensation from forming and
any resulting damage.
Specifications for the mains
water connection
-Connection to the water supply must
comply with the applicable regula-
tions in the country where the appli-
ance is being installed.
All appliances and systems used to
supply water to the refrigeration ap-
pliance must also comply with the
applicable regulations in the respect-
ive country.
-The appliance may only be connec-
ted to the mains water supply by suit-
ably qualified persons.
-The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
-Connect the stainless steel hose of
the refrigeration appliance to the
fresh water supply and do not con-
nect to a water supply in which the
water might stagnate.
-The refrigeration appliance is only
suitable for connection to a cold wa-
ter line.
-The water pressure must be between
200kPa and 800kPa (2 and 8bar).
-A stopcock must be provided
between the stainless steel hose and
the mains water supply to ensure that
the water supply can be cut off if ne-
cessary.
-Make sure that the stopcock is still
accessible after the refrigeration ap-
pliance has been installed.
Loading ...
Loading ...
Loading ...