Loading ...
Loading ...
Loading ...
Problem solving guide
107
ProblemCause and remedy
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the refri-
geration appliance is
too low.
The ventilation gaps in the housing unit have been
covered or become too dusty.
Do not block the ventilation gaps.
Dust the ventilation gaps regularly.
The appliance door has been opened too frequently,
or a large amount of fresh food has been placed in-
side or frozen at the same time.
Only open the appliance door when necessary and
for as short a time as possible.
After a while, the temperature will return to normal by
itself.
The appliance door is not properly closed.
A thick layer of ice may have formed in the freezer
zone.
Close the appliance door.
After a while, the temperature will return to normal by
itself.
If a thick layer of ice has already formed, this will af-
fect cooling and increase energy consumption.
Defrost the refrigeration appliance and clean it.
The ambient room temperature is too high. The
higher the ambient temperature, the longer the com-
pressor has to run.
See the information in “Location” in “Installation”.
The refrigeration appliance was not properly installed
in the niche.
See the information in “Installation” and “Installing
the refrigeration appliance”.
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the ap-
pliance is too low.
The temperature setting is too low.
Adjust the temperature.
A large amount of food is being frozen at once.
See “Freezing and storing food”.
The Super freeze function is still switched on.
To save energy, you can switch the Super freeze
function off yourself before this time.
Loading ...
Loading ...
Loading ...