Loading ...
Loading ...
Loading ...
10
ASSEMBLY
Adding Fuel
WARNING
Use extreme care when handling gasoline. Gasoline is extremely
flammable and the vapors are explosive. Never fuel the riding mower
indoors or while the engine is hot or running. Extinguish cigarettes, cigars,
pipes and other sources of ignition.
1. Be sure engine is outdoors and in a well-ventilated area.
2. Clean area around the fuel fill cap and remove the fuel fill cap.
3. Using an approved red GASOLINE container, add fuel slowly, being careful to
avoid spilling.
4. Fill the tank until the fuel reaches the bottom of the fuel tank neck.
5. Replace the fuel cap and tighten securely. Wipe up spilled fuel before
starting engine. If fuel is spilled DO NOT start engine. Move riding mower
away from area of spillage. Avoid creating any source of ignition until fuel
vapors are gone.
Checking and Adding Oil
Your riding mower is shipped with oil in the engine. However, you MUST check
the oil level before operating. Check and add the oil as instructed in your Engine
Operator’s Manual.
Smart Lawn App Bluetooth® Activation (If Equipped)
Take command of your lawn care with the Bluetooth® enabled Smart Lawn App
from Craftsman. Maintenance tips, weather tracking and more — everything
you need to keep the best yard on the block is now in one place. Smart Lawn also
provides step-by-step instructions and video tutorials to show you how to keep your
riding mower running right. Plus, you can order the parts you need directly from
the app. The app also tracks the charge of your riding mower battery, as well as the
state of other key replacement components like oil, blade and air filter.
Connect your Bluetooth® enabled riding mower by downloading the FREE
Craftsman Smart Lawn App to begin using all of the new connectivity features
of your Craftsman rider! Download it for FREE from the App Store or Google Play
(works with devices running iOS 9, Android 4.4 and later versions).
First, set your smartphone Bluetooth® setting to the ‘ON’ position. Next, you will
need to create your account. The app will prompt you to enter your riding mower’s
model number and serial number. Next it will attempt to connect with the riding
mower via Bluetooth®.
In order to sync your phone to the riding mower, start your mower so the engine is
running, keep your device within 150 feet of the mower, and make sure your mower’s
battery is fully charged. Remember to turn the key to the ’OFF’ position after you
connect so as not to drain the battery charge (if not running the riding mower).
Loading ...
Loading ...
Loading ...