Loading ...
Loading ...
Loading ...
Alwaysfollowallsafetyprecautionswhen
cleaningandservicingthePOWER-MATF_.
E•_ WARNIN .....................
G
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit,
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
HALF LIGHT POWER'MATE TM
1. Remove light
cover by lifting at
arrow as shown°
2. Push in and turn
bulb counterclock-
wise to remove°
3. Replace the
bulb_ Bulb must not
be higher than 15
Watts. Close light
cover until it snaps
in place_
P
/
/
_ Push tn
NOTE: See PARTS AND FEATURES for
Bulb #.
FULL LIGHT POWER-MATE TM
1, Remove light
cover by pressing
in and lifting both
sides as shown_
2. Push in and turn
bulb counterclock-
wise to remove°
3. Replace the
bulb Bulb must not
be higher than 15
Watts° Close light
cover until it snaps
in placer
Push In
And Turn
NOTE: See PARTS AND FEATURES for
Bulb #.
Disconnect cleaner from electrical outlet.
Check and remove hair, string and lint build-
up frequently in the POWER-MATE TM brush
and brush support areas. If build-up
becomes excessive, disconnect POWER-
MATE TM from wand and follow the steps
below_ instructions can also be found under
the light cover
TO REMOVE
BELT:
1. Remove light cover
and light bulb as
shown under LIGHT
BULB CHANGING.
2. Unscrew the
POWER-MATE TM
cover screws.
15
Loading ...
Loading ...
Loading ...