Loading ...
Loading ...
Loading ...
6
the parent unit to stop beeping and flashing.
8.3 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the Camera unit.
1. Press the MENU key then the menu will pop up;
2. Press the◀ / ▶ / ▲ / ▼ key until the lullaby icon is selected by red box;
3. Press key enter into sub-menu;
4. Press the◀ / ▶ / ▲ / ▼ key to select one of the 8 available lullabies, you can pick single
playback, loop (all 8 lullabies) playback or stop ;
4. Press key to confirm.
Note : The lullaby default setting is OFF.
8.4 ALARM SETTING
You can use the alarm to remind yourself to feed your baby / change diaper / sleeping, etc.
1. Press the MENU key then the menu will pop up;
2. Press the ◀ / ▶ / ▲ / ▼ key until the alarm icon is selected by red box.
3. Press key enter into sub-menu, Press the ◀ / ▶ / ▲ / ▼ key to selected the alarm
time you need;
4. Press key to confirm;
5. Press key to Exit.
Note 1: The minimum unit is 0.5 hour. The maximum setting is 5 hours (7 levels);
Note 2: Once the alarm is turned on, alarm icon will display on the screen;
Note 3: The alarm default setting is OFF;
Note 4: When the alarm is ringing, press any key on the parent unit to turn the alarm off;
Note 5: If you don’t turn off the alarm, the alarm will ring for 1 minute. After three minutes
the alarm will ring again for 1 minute. The alarm will ring for 3 times in total, after this the
alarm goes off.
8.5 VOX SETTING
This mode allows you to control the sound activation of your baby unit. If there is no sound
around the baby unit within 30 seconds, it will stop audio transmission and turn off the
screen of the parent unit. When the baby unit detects any sounds louder than the sensitivity
level, it will start transmitting the signal to the parent unit again and turn on the screen of
the parent unit. To change the VOX level, please follow the below instructions.
1. Press the MENU key then the menu will pop up;
2. Press the◀ / ▶ / ▲ / ▼ key until the VOX icon is selected by red box.
3. Press key enter into sub-menu, then press ▲ / ▼ key to select desired level;
4. Press key to confirm;
5. Press key to Exit.
Note: is Low sensitivity level; the baby have to make a lot of sound before the VOX
function will be activate;
Note: is middle sensitivity level;
Note: is High sensitivity level; the baby don't have to make a lot of sound before the
VOX function will be activate;
12
3
6
9
service@hellobabyfamily.com
Loading ...
Loading ...
Loading ...