Loading ...
Loading ...
Loading ...
7.1 POWER SAVE/SCREEN OFF
Short press the power key to turn on / off the screen.
7.2 VOLUME ADJUSTMENT
Press the ▲ key to increase the volume; Press the ▼ key to decrease the volume;
7.3 BRIGHTNESS ADJUSTMENT
Press the ◀ key to decrease the brightness; Press the ▶ key to increase the brightness;
7.4 CAMERA VIEW/SCAN
Press scan key to view/scan camera, during scan mode, the scan icon will be
displayed on the top of screen. Each camera’s video will be stay on the LCD around 10
seconds then change to next camera;
7.5 DIGITAL ZOOM & PAN / TILT
Press and hold the key around 2 seconds to operate Zoom in / out; At the Zoom mode,
press the ◀ key to Pan left; press ▶ key to Pan right; press ▲ key to tilt up; press ▼ key
to tilt down; During digital zoom mode, the zoom icon will be displayed on the top of
screen.
Warm reminder: If you want to adjust the volume/Brightness, you have to exit the Zoom
mode before you operate it.
7.5 TWO WAY TALK
Press and hold key to enter two way talk mode. A microphone icon will be displayed
in the corner of the LCD screen. Release the key to stop.
Note: When you are in the two-way talk mode, the parent unit speaker is muted.
8.1 PAIRING THE CAMERA AND PARENT UNITS
The baby unit is pre-registered to your parent unit. You do not need to register it again
unless the baby unit loses its link with the parent unit. To re-register your baby unit, or
6. 3 BABY UNIT OVERVIEW:
CMOS sensor
Speaker
Light sensor
MIC
Infrared LEDs
Power LED
Pair key
DC-Jack
Temperature
sensor
2
4
service@hellobabyfamily.com
7. KEY OPERATION
8. MENU OPERATION
Loading ...
Loading ...
Loading ...