Loading ...
Loading ...
Loading ...
Turn ON the electric power at the
main fuse or circuit breaker box.
Fig.14
PAGE: 7 / 8
Fig.15
Transmitter
Wall Bracket
Screw
Fig.16
Install the battery (9V, included) into the transmitter.
* Press "HI" button to turn on the fan at high speed.
* Press "MED" button to turn the fan in medium speed.
* Press "LOW" button to turn the fan in low speed.
* Press "FAN OFF" button to turn off the fan.
* Press "LIGHT ON/OFF" button to turn on or turn off the light.
* Press and hold the "DIMMER" button to dim or brighten lights to the desired level and
release, and the brightness level will be memorized. Turn on the light again, then fan light
will be restored to the brightness-level at which it was dimmed last time.
Note:
1. This remote controller has a memory function setting. The fan will operate at the same
speed and the fan light will stay at the same brightness-level as the last time the power
supply was turned off.
2. Compatible Wall Switch: Lutron SKU# S2-LFSQH-WH.
Install the transmitter wall bracket on the wall with two screws and place transmitter in it carefully.
Fig.13
Slide Switch
Reverse
Forward
The slide switch on
connect plate of light kit
sets direction of fan rotation. Select the desired
direction of fan rotation. Push the slide switch
left for " Forward" and right for "Reverse”.
Note: Wait for fan to stop before reversing
the direction of blade rotation.
220407
Loading ...