Loading ...
Loading ...
Loading ...
8 English
Installation
InstallationInstallation Requirements
Duct hole guide_Op.2
Cabinet floor drilling work: hood exhaust outlet (damper) cutting work
Rear (Wall)
Front
Furniture's Center Line
Cutting Area
13 25
/
64" (34.0 cm)
CAUTION
• Cut the cabinet in a way that does not interfere with the damper outlet.
• Vacuum the sawdust to prevent it from blowing away.
• Make sure the cabinets are not damaged.
• Before cutting the cabinet, explain to the customer that the cabinet needs to be
cut, and then obtain consent before proceeding.
Method and sequence of cutting the upper cabinets
1. Refer to the cutting dimensions above and mark the lines to be cut on the cabinet.
2. Use a jigsaw to cut the upper cabinets. When cutting, use a vacuum cleaner to
minimize the amount of dust.
Installation Tool Jigsaw, Grinder
CAUTION
• This product must be installed by a professional hood installer.
• If the product is installed on a tiled wall or on drywall, there is a risk of the hood
falling, so be sure to fix the fixing screws to the concrete behind the wall.
• Do not attach the product as if it were a tile or fix it with cement, silicone, or
adhesive. Install it on a concrete wall using the provided screws.
Setting the Location
1. Be sure to check that the product you
have purchased is suitable for the
installation space you have chosen.
24
1
/
64
" – 35
63
/
64
"
(61.0 cm – 91.4 cm)
26
31
/
32
" – 35
63
/
64
"
(68.5 cm – 91.4 cm)
2. Fix the enclosed installation template
and then install it so that it does not
twist horizontally.
CAUTION
Please pay attention to the mounting
height. The mounting height is
measured from the top of the range
to the upper cabinets. The mounting
height for an electric cooking surface
is measured from its glass cooktop. For
a gas cooking surface, the mounting
height is measured from the top of the
burning grates.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 8MANUAL INSTALL_Range Hood_DG68-01500A.indb 8 2023-01-05 오후 3:15:302023-01-05 오후 3:15:30
Loading ...
Loading ...
Loading ...