Loading ...
Loading ...
Loading ...
Operating the appliance en
17
Operating the grill
The appliance door must be closed during grilling.
Note: When using the grill, a cooking time of
60 minutes must not be exceeded.
1. Open the appliance door.
2. Press and hold the selector on the oven and turn it
to the ( position to ignite the gas burner.
The grill gas burner will ignite. Press and hold the
selector for a few seconds until the flame stabilises.
3. Close the appliance door carefully.
Notes
■ If the gas burner does not ignite within 15 seconds,
stop attempting to ignite the flame, open the oven
door and wait for 60 seconds.
■ If the flame goes out (but you have not deliberately
turned it off), turn the selector to the "Û" position and
wait for 60 seconds.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the grill
Turn the control knob to the Û position.
Rotary spit
Preparing the rotary spit
1. Slide a retaining clip onto the rotary spit and screw
on the handle.
2. Place the roast as close as possible to the centre of
the rotary spit.
3. Use retaining clips to secure the roast in place.
4. Use milled screws to secure the retaining clips.
Inserting the rotisserie spit
:Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1. Push the rotisserie spit rack fully into the appliance
on shelf level 3.
2. Place the rotisserie spit onto the rotisserie spit rack
and unscrew the handle.
3. Push the rotisserie spit rack in fully.
4. Push the rotisserie spit rack to the right and into the
motor adaptor.
5. Pour water into a baking tray and slide it in on shelf
level 1 to collect any fat that drips out.
6. Close the appliance door.
Switching on the rotary spit
Note: When using the rotisserie spit, heat the oven
using the ( heating mode. Insert the rotisserie spit
before setting the F heating mode.
1. Turn the control knob for the oven to the F position.
2. Set the temperature.
Note: Add some water to the universal pan to catch any
fat that drips out.
Loading ...
Loading ...
Loading ...