Loading ...
Loading ...
Loading ...
11
Connecting to cabinets
Connect the M-Box (SBB-MBOX) and the cabinet (IW008R) to the installed cabinet for video
signal transmission.
"
Connect the M-Box to the external device before connecting the M-Box to the cabinet.
"
Before connecting power to the cabinets, connect the BRIDGE BOX to the cabinets first.
"
Connect only one type of LED pitch cabinets to a single M-Box. Normal picture quality may
not be obtained if different types of cabinets are connected. Do NOT use different types of
LED pitch cabinets together.
LAN
DATA IN
DATA INDATA OUT 1
ONE CONNECT
BLUETOOTH
WI-FI
HDBT IN
HDBT OUT
DATA IN
DATA OUT 2
M-Box
(SBB-MBOX)
Last cabinet (Vertical Pillar)
(IW008R)
BRIDGE BOX
First cabinet
(IW008R)
Last cabinet (Horizontal Pillar)
(IW008R)
1
Connect the HDBT terminals on the M-Box and BRIDGE BOX using a LAN cable.
"
Use a cable of CAT 6 (*STP type) or higher.
*STP: Shielded Twisted Pair
"
Connect the HDBT by using a LAN cable that is 15–100 m in length. If you use a cable that
is out of specified length range, the signal quality may be unstable.
"
Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables). If a LAN cable that is not recommended is used, the HDBT signals
may become unstable.
2
Use cables enclosed with the M-Box(SBB-MBOX) unit to connect to the BRIDGE BOX and
cabinets.
Supported resolutions per installation
Resolution 1920 x 1080 3840 x 2160 7680 x 4320 (8K)
Quantity of cabinets 2 x 2 4 x 4 8 x 8
"
M-Box(SBB-MBOX) unit includes 8 ONE CONNECT ports, supporting up to 8K resolution.
Loading ...
Loading ...
Loading ...