AEG HRE95770FB

User Manual - Page 11

For HRE95770FB.

PDF File Manual, 20 pages, Read Online | Download pdf file

HRE95770FB photo
Loading ...
Loading ...
Loading ...
When you activate the cooking
zone but do not activate the
outer ring the light that comes
out from the zone may cover the
outer ring. It does not mean that
the outer ring is activated. To
see if the ring is activated check
the indicator.
5.4 PowerBoost
Use the function to get a desired heat setting
in a shorter time. When the function is on, the
cooking zone operates at the highest heat
setting in the beginning and then continues to
operate at the desired heat setting.
To activate the function for a cooking
zone: touch
. Immediately touch a desired
heat setting. The indicators above and the
chosen heat setting appear. You can select a
new heat setting as long as the indicators are
steady. If the indicator over the heat setting is
blinking, a change of the heat setting will
deactivate the function.
To deactivate the function: change the
heat setting.
5.5 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / As long as the
indicator is on, there is a risk of
burns from residual heat.
The indicators / / appear when a
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
for the neighbouring cooking zones even
if you are not using them,
when hot cookware is placed on cold
cooking zone,
when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
5.6 Timer
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
Set the heat setting for the selected cooking
zone and then set the function.
You cannot activate the function
while the Hob²Hood function is
running.
1. Press . 00 appears on the timer
display.
2. Press or to set the time (00-99
minutes).
3. Press
to start the timer or wait 3
seconds. The timer begins to count
down.
To change the time: select the cooking
zone with and press or .
To deactivate the function: select the
cooking zone with
and press . The
remaining time counts back to 00.
The timer finishes counting down, a signal
sounds and 00 blinks. The cooking zone
deactivates. Press any symbol to stop the
signal and blinking.
Minute Minder
You can use this function when the hob is
activated but the cooking zones do not
operate. The heat setting shows 00.
You cannot activate the function
while the Hob²Hood function is
running.
1. Press .
2. Press
or to set the time.
The timer finishes counting down, a signal
sounds and 00 blinks. Press any symbol to
stop the signal and blinking.
To deactivate the function: press
and
. The remaining time counts back to 00.
ENGLISH 11
Loading ...
Loading ...
Loading ...