Loading ...
Loading ...
Loading ...
REMOTE CONTROL
NOTE: THIS UNIT INCLUDES ONE LITHIUM BATTERY,
CR2025/3V. PLEASE REMOVE THE PROTECTIVE PLASTIC
FROM THE REMOTE CONTROL BATTERY BEFORE OPERATION.
To operate the fan with the remote control, aim it
towards the control panel on top of the fan tower.
The remote control can operate from a distance up to
approximately 16 feet from the fan body and at an
angle variation of 15-20 degrees.
Avoid exposing the display panel to direct sunlight, as it
may interfere with signal transmission.
Replacing the Remote Control Battery (Figure 5)
The cells should be disposed of properly, including
keeping them away from children. Even used cells may
cause injury.
1. Locate the battery compartment on the back of the
remote control handset. Press tab and pull out battery.
2. Remove old battery.
3. Place new battery into
battery compartment.
4. Slide battery
compartment into the
remote control handset.
NOTES:
1. Remove the battery
from the remote when it
is not in use for an
extended period.
2. Remove the battery
before discarding the remote at the end of its useful
product life.
3. Do not discard used batteries into household trash
containers. Contact your local government for disposal
or recycling practices in your area.
SETTING UP THE HOLMES MOBILE APP
Note: A 2.4 GHz Wi-Fi network is required.
1. Download the Holmes
®
App from Google Play, the
Apple App Store or the QR code located on the back of
this Instruction Manual.
2. Create an account by following the steps in the App.
3. Enter the verification code you received to confirm
your account and create a password.
4. Select "Add Device" or the plus (+) sign in the top
right corner.
Auto Pairing
(Recommended Method)
1. Ensure Bluetooth
®
, Wi-Fi, and
GPS are activated on your mobile
device.
2. Press and hold the OSC/WIFI
PAIRING button on the fan's
control panel for 5 seconds, until an
audible beep is heard and the red
indicator light is flashing which
indicates the device is in pairing
mode. Note: if pairing is not
completed within 2-3 minutes, the device will exit pairing
mode and step 2 will need to be repeated.
3. Select “Auto Scan” at the top of the screen.
You should see an icon for the fan that has been found.
4. Click "Next."
5. Input your Wi-Fi name and password.
6. Wait for the connection to be established.
7. Press "Done" (top right-hand corner).
Your fan is now available to control from your smartphone.
Manual Pairing
If Auto Pairing is unsuccessful:
1. Ensure Bluetooth
®
, Wi-Fi, and GPS are activated on
your mobile device.
2. Ensure the fan has been powered off for 10 seconds
or more, then power on the fan.
3. Press and hold the OSC/WIFI PAIRING button on
the fan's control panel for 5 seconds, until the red
indicator light is flashing. The device is now in pairing
mode. Note: if pairing is not completed within 2-3
minutes, the device will exit pairing mode and step 3 will
need to be repeated.
4. On your mobile device, click "add device", then
select "add manually" at the top of the screen.
Click the fan icon.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the
instruction manual. This fan is not for continuous
operation or equivalent.
3. To protect against electrical shock do not immerse
unit, plug or cord in water or spray with liquids and
plug the appliance directly into a 120V AC electrical
outlet.
4. Close supervision is necessary when any appliance
is used near children.
5. Not intended for use by children
6. Unplug from outlet when not in use, when moving
fan from one location to another, before putting on
or taking off parts and before cleaning.
7. Avoid contact with moving parts.
8. Do not operate in the presence of explosive and/or
flammable fumes.
9. To avoid fire hazard, NEVER place the cord under
rugs or any parts near an open flame, cooking or
other heating appliance.
10. Do not operate any appliance with a damaged cord
or plug after the appliance malfunctions, or has
been dropped/damaged in any manner. Discard
fan or contact customer service.
11. Do not run cord under carpeting. Do not cover cord
with throw rugs, runner, or similar coverings. Do
not route cord under furniture or appliances.
Arrange cord away from traffic area and where it
will not be tripped over.
12. The use of attachments not recommended or sold
by the appliance manufacturer may cause hazards.
13. Do not let the cord hang over the edge of a table,
counter or come in contact with hot surfaces or
leave exposed to high traffic areas.
14. Do not use outdoors.
15. To disconnect, grip plug and pull from wall outlet.
Never yank on cord.
16. Always use on a dry, level surface.
17. Do not operate fan until fully assembled with all
parts properly in place.
18. This product is intended for household use ONLY
and not for commercial or industrial applications.
19. WARNING: To reduce the risk of electrical shock and
injury to persons, do not use in window.
20. WARNING: To reduce the risk of fire or electric
shock, do not use this fan with any solid-state
speed control device.
21. This product employs overload protection (fuse).
A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product
from the outlet. Replace the fuse as per the user
servicing instructions (follow product marking for
proper fuse rating) and check the product. If the
replacement fuse blows, a short circuit may be
present and the product should be discarded or
contact customer service.
22. Use the fan in a well-ventilated area. When in use,
place the fan at least 8" from any walls to ensure
proper air flow. The fan must not be located
immediately below or beside a curtain.
23. Do not obstruct the airflow with any objects or
place anything inside the fan opening.
24. Do not use in extreme temperatures, humidity, or
dusty environments.
25. Do not place any objects on the fan.
26. Do not place the fan directly below a power outlet
or you risk the cord being sucked in.
27. When the fan is oscillating do not manually turn
the fan to avoid damage.
28. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
!
WARNING: Chemical Burn Hazard. Keep batteries
away from children. This product contains a lithium
button/coin cell battery. If a new or used lithium button/
coin cell battery is swallowed or enters the body, it can
cause severe internal burns and can lead to death in as
little as 2 hours. Always completely secure the battery
compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and
keep it away from children. If you think batteries might
have been swallowed or placed inside any part of the body,
seek immediate medical attention.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in
a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
REMOTE CONTROL AND MOBILE APP
INSTRUCTIONS
ASSEMBLY
Estimated assembly time: 5-10 minutes
No tools required.
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM
THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR
PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
1. Align and press together the base halves (figure 2).
2. Remove the lock nut from the fan housing by
rotating counterclockwise (Figure 2, 3).
3. Place the base onto the bottom of the fan housing
and rotate to secure.
4. Place the lock nut onto the bottom of the base and
rotate clockwise to tighten (Figure 3).
5. Place fan upright on a dry, level surface.
OPERATING INSTRUCTIONS (Figure 4)
1. Plug the cord into a standard 120 Volt AC outlet.
2. To turn the fan ON, press the POWER button (A)
located on the control panel or remote control.
The fan will start running in the lowest setting "I"
(LOW).
3. Press the SPEED button (C) to cycle through the 3
speed settings in sequence.
The corresponding indicator light will illuminate to
confirm the selection:
I-Low II-Medium III-High
4. To turn OSCILLATION ON and OFF, press the
Oscillation (B) button.
5. To set automatic shutoff, press the TIMER button (E).
When set, the fan will run and automatically shut off
after the set duration of time (1-15 hours) has expired.
Note: To set the timer for 15 hours, press the timer
button until all four lights (1H, 2H, 4H, 8H) are
illuminated.
6. To activate SLEEP mode, press the MODE button (D).
This function slows the BREEZE setting by one level
every ten minutes until it reaches LOW.
To activate BREEZE mode, press the MODE button
again.
The fan will cycle through alternating speeds with
brief pauses to simulate a natural outdoor breeze:
BREEZE I: Cycles through low and medium speeds.
BREEZE II: Cycles through medium and low speeds.
BREEZE III: Cycles through medium, high and low
speeds.
To activate POWER BREEZE mode, press the MODE
button again. This function will provide maximum air
velocity.
7. Press mute on the remote control to silence setting
confirmation beeps. To re-activate setting
confirmation beeps, press mute again.
A. Power Button
B. Oscillation/Wifi Pairing Button
C. Speed Button
D. Mode Button
E. Timer Button
F. Speed Setting Indicator Lights
G. Timer Indicator Lights
H. Mode Indicator Lights
I. Mute Button
J. Wifi Indicator Light
I
D
H
G
J
C
F
E A B
A
D
E
B
C
A. Control Panel
B Fan Housing
C. Base Halves
D. Remote Control
Storage
E. Remote Control
Figure 1
C
Lock Nut
C
Lock Nut
Figure 2
Figure 3
Power Cord
Figure 5
ASSEMBLY AND OPERATING
INSTRUCTIONS
PARTS AND ASSEMBLY
Figure 4
A
E
D
B
C
Loading ...
Loading ...
Loading ...