Loading ...
Loading ...
Loading ...
AUX Output
Audio Input
Optical Input / Output
Button Control
Connections
Cable Connection
Note: To disconnect a Bluetooth device, press and hold the Play Button on the
remote control for 5s. The Bluetooth Mode indicator will flash when waiting for a
reconnection.
Note: Please plug the appropriate cable into the corresponding port to connect
the device, then select the corresponding mode.
Bluetooth® Connection
1. Turn on the sound bar and select the Bluetooth® mode.
2. Activate the Bluetooth® function on your device and search for devices nearby.
3. Find “TaoTronics TT-SK026” in the search results and tap to connect. A beep
will be heard upon a successful connection.
4. The BT word will show on the display screen once a successful connection.
Note:
• The BT signal bar will keep flashing when the sound bar is pairing.
• Please make sure no other active Bluetooth® devices are within range, and that
the sound bar is within 3ft / 1m away from your device.
• It’s not recommended to pair the sound bar with your TV Bluetooth for it may
cause audio delay.
• Before starting to play via Bluetooth, please lower the volume to a moderate
level.
Power On / Off
Source Button /
Mode Selection
Volume +
Volume -
Mute
EQ Mode
Treble
Bass
Press the Power Button to turn on / off the sound bar.
When the sound bar is on, press the Source Button on the
remote control or press the Mode Selection on the sound
bar to select the Audio / OPT / Coaxial / Bluetooth mode
and the corresponding indicator will light up.
Press the Volume + button
Press the Volume - button
Press the Mute Button to mute / unmute
Press the EQ Mode Button to select Music / Movie /
News / CUST mode.
• When the sound bar is in EQ/CUST mode, press the
Treble Button once to enter CUST/TREBLE, then press
Volume +/- to adjust TR (-3，-2，-1，0，1，2，3).
• When the sound bar is not in EQ/CUST mode, press the
Treble Button once to enter CUST/TREBLE mode.
• When “TR xx” is displayed, press the Treble Button once
to return to the original source mode.
• If no operation is done after “TR xx” is displayed for
around 15s, it will return to volume mode automatically.
• When the sound bar is in EQ/CUST mode, press the Bass
Button once to enter CUST/BASS, then press Volume +/-
to adjust BS (-3，-2，-1，0，1，2，3).
• When the sound bar is not in EQ/CUST mode, press the
Bass Button once to enter CUST/BASS mode.
• When “BS xx” is displayed, press the Bass Button once to
return to the original source mode.
• If no operation is done after “BS xx” is displayed for
around 15s, it will return to volume mode automatically.
05 06
Loading ...
Loading ...
Loading ...