Loading ...
Loading ...
Loading ...
Operation
1、 Put the power switch to “ON” position, open the valve of CO2 cylinder and adjust the flow.
2、 Choose suitable welding contact tips based on wire diameter.
3、 Tune the voltage switch, speed switch to the right position based on the thickness of the work piece
and mechanics.
4、Press the torch switch to let out the wire to the torch head and begin to work.
Installment ,when use gasless welding (Flux-cored wire)：
1) Insert the cable connector of earth cable into the socket in the front panel.
2) Set the welding wire spool on the wheel axis, the wheel hole should be matched with the wheel
fixer.
3) Choose wire slot according to wire size.
4) Loosen the screw of wire-pressing wheel, put the wire into slot via wire-lead tube, tune the
Wire-pressing wheel to fix wire from gliding, but pressure should be suitable in case the wire distorts
and affects wire sending.
5) Wire roller should turn clockwise rotation to let out wire, to prevent wire from gliding; wire is
usually set to the fixed hole on the wheel side. To prevent the bent wire from getting stuck, please cut off
this part of the wire.
6) The MIG torch has been settled inside of the machine just need put the wire into the torch by hand.
Loading ...
Loading ...
Loading ...