Loading ...
Loading ...
Loading ...
18/24
PIZZA STONE
Use a mild soapy water solution. Non-abrasive scouring powder can be used on stubborn stains,
then rinse with water.
BURNER
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling grate.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new burner.
Reinstall the burner, check to ensure that the gas valve orifices are correctly positioned and
secured inside the burner inlet (venturi).
IGNITION BATTERY
This pizza oven ignition is powered by 1 x AA Battery. To replace this battery when required,
unscrew the ignition cover to replace the battery and ensure the new battery is put in right
position, then screw the ignition cover.
In some cases your pizza oven will light back because of an insect crawling inside the burner
venturi or a spider spinning its web inside the burner. This can be rectified by using a bottle
brush inserted through the burner venturi and pushing it into the burner over the burner length. If
condition persists consult your gas dealer.
SERVICING
Your pizza oven should be serviced annually by a competent registered person.
AA 1.5V
AA 1.5V
Loading ...
Loading ...
Loading ...