Loading ...
Loading ...
Loading ...
3
unit from the outlet.
■ After unplugging the unit, wait at least 10 minutes before re-plugging it.
Failure to do so could cause damage to the compressor.
UNPLUG CORD
■ To minimize shock and fire hazards, please do not plug or unplug the cord
with wet hands.
■ During maintenance and cleaning, please unplug the unit.
PROPER GROUNDING REQUIRED
■ To minimize shock and fire hazards, make sure that the unit is properly
grounded.
TEMPERATURE CONTROL OPERATION
INSTRUCTIONS
－Cooler model
Setting the set point (desired temperature value)
To display or set the set point, proceed as follow:
1) Press SET for 1s, the set value will start flashing after a few moments;
2) Increase or decrease the value using UP or DOWN;
3) Press the SET button again to confirm the new value.
Loading ...
Loading ...
Loading ...