Loading ...
Loading ...
Loading ...
ENGLISH
7
b. Check to see if receptacle is connected to a light
switch which turns power off when you turn out the
lights;
c. Move the charger and battery pack to a location
where the surrounding air temperature is
approximately 65°F – 75°F (18° – 24°C);
d. If charging problems persist, take the tool, battery
pack and charger to your local servicecenter.
4. The battery pack should be recharged when it fails to
produce sufficient power on jobs which were easily
done previously. DO NOT CONTINUE to use under these
conditions. Follow the charging procedure. You may
also charge a partially used pack whenever you desire
with no adverse effect on the batterypack.
5. Foreign materials of a conductive nature such as, but
not limited to, grinding dust, metal chips, steel wool,
aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Always
unplug the charger from the power supply when there
is no battery pack in the cavity. Unplug the charger
before attempting toclean.
6. Do not freeze or immerse the charger in water or any
otherliquid.
Storage Recommendations
1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat orcold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimalresults.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged beforeuse.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Specifications
DWH161
Airfow cfm 19
Weight (without battery) 3.64 lbs (1.65 kg)
Hose Length 39" (99 cm)
HEPA Filter Yes
Filter Cleaning Mechanism Yes
Static Water Lift in 38
Vacuum Suction Pressure mbar 95
Capacity cm³ 210
Anti-Static Hose Yes
Voltage V 20
Wireless Tool Control™ Yes
Height 9.53" (242 mm)
Length 7.99" (203 mm)
Width 3.74" (95 mm)
Wet/Dry Dry only
DWH161
Noise values and vibration values (triax vector sum) according to
EN60745-2-6:
L
pA
(emission sound pressure level) dB(A) 66.3
L
WA
(sound power level) dB(A) 82.5
K
wa
(uncertainty for the given
sound level)
dB(A) 1.5
Intended Use
Your dust extraction system DWH161 has been designed
for the extraction of dust in professional hammerdrilling in
masonry or concrete, and with solid drill bits mounted to
the power tool. DO NOT use with SDSPLUS or SDSMAX
hollow drillbits. This dust extractor is for household and
commercialuse.
This dust extraction system will fit the DEWALT D25301D,
DWH200D, DNP615, DNP616 and DCS512 tools directly.
When combined with the DWV9109 Universal Mini Stepped
Adapter Dust Extractor Nozzle, the dust extractor will
connect to the DCW200, DCW210, DWE6423, DWE6421,
DWE6420, DWE6411, DWE6401DS, DCS356B, DCS355B,
DCS354B, DWE315K, DCW600, DWP611, DW616, DW618,
DW621, DCS512, DCS571 , DCS565, DCS570, DCS574,
DCS573, DCS578, DCS577, DWE575SB, DWE575 , DCS520,
DWS520, DCS334, DCS335, DCS331, DW331K tools.
This product is NOT to be used for filtering of pathogens,
for example Covid-19. Follow all local, state, and federal
guidance on general cleaning practices.
DO NOT use under wet conditions or in presence of
flammable liquids orgases.
The dust extraction system is an attachment for use with
professional powertools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
Attaching the Strap (Fig. A, D)
Your dust extraction system comes with a strap
10
that can
be connected to the strap hooks
11
in either manner as
shown in Fig.D.
Loading ...
Loading ...
Loading ...