Loading ...
Loading ...
Loading ...
Page 20 User Manual
6. Install Weather Stripping (ENERGY STAR models only)
If AC is Blocked by Storm Window
Fig. 11
In order to minimize air leaks between the
room air conditoner and the window opening,
trim the weather stripping to the proper
rotective backing and
plug any gaps if needed (Fig. 11).
SASH
1-1/2"min
(38 mm)
Board thickness
as required, for
proper pitch to rear,
along entire
sill. Fasten with nails
or screws.
Storm window
frame or other
obstruction.
Fig. 12
Add wood as shown in Fig. 12, or remove
storm window before air conditioner is
installed.
If storm window frame must remain, be sure
the drain holes or slots are not caulked or
painted shut. Accumulated rain water or
condensation must be allowed to drain out.
Models RAC-WK05/06/08/10/12 /15
Removing AC From Window
, and disconnect power cord.
• Remove sash seal from between windows, and unscrew sash lock.
• Remove screws installed through top rail and side panel frames.
• Slide the accordion panels into the rails to close.
rm grip on the air conditioner, raise the sash and carefully remove.
• Be careful not to spill any condensate while lifting unit from window. Store parts WITH air conditioner.
Installation
Instructions
Loading ...
Loading ...
Loading ...