Loading ...
Loading ...
Loading ...
19
HARD
FLOOR
BOOST
MODE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Dust escaping from vacuum 1. Dirt cup full. 1. Empty dirt cup. (see page 16)
2. Dirt cup not installed correctly. 2. Review dirt cup removal and replacement. (see page 17)
3. Rinsable filter and/or separator not installed completely. 3. Review filter removal and cleaning. (see page 17)
4. Filter is dirty 4. Rinse Filter
Vacuum tools won’t pick up 1. Dirt cup full. 1. Empty dirt cup. (see page 16)
2. Filter is clogged. 2. Remove filter and clean. (see page 17)
3. Power carpet nozzle not spinning. 3. Remove and reattach. (see page 18)
Poor suction 1. Dirt cup not seated completely. 1. Reinstall dirt cup, make sure lid is closed completely. (see page 17)
2. Filter is clogged or dirty. 2. Remove filter and clean. (see page 17)
3. Dirt cup not installed correctly. 3. Review filter removal and replacement. (see page 17)
4. Battery charge is getting weak. 4. Charge battery. (see page 10)
5. Nozzle/dirt passage clogged. 5. Turn off the unit and then disconnect the nozzle to remove
debris. (see page 18)
Vacuum running warm 1. Dirty filter. 1. Clean filter, rinse, dry and re-assemble. (see page 17)
2. Low suction. 2. Locate clog and remove.
Vacuum won’t turn ON 1. Battery is not charged. 1. Charge battery. (see page 10)
or charge
2. Your battery may be too hot. 2. Let the vacuum cool for 30 minutes and retry.
Loading ...
Loading ...
Loading ...