Pyle PCA12BT Bluetooth Stereo Amplifier - Mini Blue Series Audio Power Amplifier | Wireless Streaming | USB Charge Port | AUX (3.5mm) Jack | 2 x 25 Watt ( )

User Manual - Page 3

For PCA12BT.

PDF File Manual, 4 pages, Read Online | Download pdf file

PCA12BT photo
Loading ...
Loading ...
8 9 10 11 12 13
8.Bluetooth Antenna
antenna is best receiving for Bluetooth signal.
9.RCA Cable L/R LINE Input
Lets you to connect the desired LINE input source.
10.Push Type Speaker L/ R Terminals
Let you easily connect the speakers'wires directly to
the amplifier
11.110V/220V Switch
According to power voltage, push this button to the
correct station of the 110V or 220V.
12.Fuse
The amplifier uses a
fuse for protection against surges
and short circuit. If the amplifier suddenly turn off and
will not turn on, check the fuse. If necessary, replace
it with a 1-amp, 250- volt, fast- acting, 5x20mm fuse
(not supplied)
13.AC IN Power Cord
Connect to AC 110V/60Hz or
220V/50Hz
-Use of
-
-
-
-
-
3 4
BLUETOOTH FUNCTION INSTRUCTION
External devices which have a builtin Bluetooth feature can be
connected to this amplifier wirelessly to play through the
amplifier’s speakers.
BACK PANEL
1. Be sure that the amplifier is powered on. And its better to pull
the Bluetooth Antenna on at the back of panel for better
receiving. Press MODE button on the front panel in like
situation, and the Bluetooth Indicator is light on. (The unit is
automatically ready to pair with your device)
2. Turn on the Bluetooth function of your external device.
3. Search for available devices within range of your external
Bluetooth device.
4. Wait for a while then find the “TD301-RY” on the paired
devices list on your external device and select “TD301-RY,
or find the “BT” on the paired devices list on your external
device and select “BT.
5. Your amplifier will beep and the lights will flash once when
pairing is a success.
6. You can now play music and other audio on your external
device through your amplifier.
7. The amplifier will beep and the lights will flash once again
when the external device is turned off or unpaired.
Loading ...