Loading ...
Loading ...
Loading ...
USB High-Definition Live Camera User Manual
7
16. BACKLIGHT Key
Backlight ON/OFF: Press repeatedly to
enable or disable the backlight compensation.
NOTE:
Effective only in auto exposure mode.
If there is a light behind the subject, the
subject will become dark, press the backlight
key to enable the backlight compensation.
Press again to disable this function.
17. P/T RST (PTZ Reset) Key
Press to
preset Pan/Tilt self-test.
Image Freezing Function
Manual freeze: Press the [F4] key to open the
freezing function, “Freeze” will be displayed
on the left upper corner. To cancel the freeze
function, press [F4] key again, “Unfreeze”
shows on the left upper corner and it will be
disappeared automatically five seconds later.
Image freeze when recalling the preset: After
enable the “Image Freeze” function by the
OSD menu setting, the screen will remain the
previous image when recalling the preset. The
screen will switch to the preset image after
the camera turn to the preset position.
Shortcut Set
[*] + [#] + [1]: OSD menu default English
[*] + [#] + [3]: OSD menu default Chinese
[*] + [#] + [4]: Display current IP address
[*] + [#] + [6]: Quickly recover the default
[*] + [#] + [8]: Check the camera version
[*] + [#] + [9]: Quickly set up inversion
[*] + [#] + [MANUAL]: Restore to default IP
address.
5 GUI Settings
5.1 MENU
Press [MENU] key to display the main menu. Use
the arrow key to move the cursor to desired item
and press the [HOME] key to confirm to enter the
corresponding sub-menu.
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Setup
Communication Setup
Restore Default
[Home] Enter
[Menu] Exit
5.2 EXPOSURE
When in main menu page, move the cursor to
[Exposure] and press [HOME] key to confirm to
enter the exposure page as below.
EXPOSURE
Mode Auto
ExpCompMode Of
f
Backlight Of
f
Gain Limit 1
Anti-Flicker 50Hz
Meter Average
DRC 3
Select Item
Change Value
[Menu] Back
Mode: Auto, Manual, SAE, AAE, Bright.
ExpCompMode: On, Off (Effective only in Auto
mode).
ExpComp: -7 ~ +7 (Effective only in
ExpCompMode item to On).
Backlight: On, Off (Effective only in Auto
mode).
Bright: 0 ~ 17 (Effective only in Bright mode).
Loading ...
Loading ...
Loading ...