Loading ...
Loading ...
Loading ...
LIVO OWNERS MANUAL - INDOOR UNIT | 13
OPERATION OF WIRELESS REMOTE CONTROLLER (Continued)
NOTE
• Under energy-saving function, fan speed defaults to
Auto and can’t be adjusted.
• Under energy-saving function, you cannot adjust
Fan speed or use TURBO.
• If the energy-saving function has been set in the
COOL mode, pressing the “SLEEP” button will can-
cel energy-saving. If the SLEEP function has been
set in the COOL mode, starting the energy-saving
function will cancel SLEEP.
Vacation mode (freeze guard) Heating in 8°C mode
or 46°F mode
In the HEAT mode, press “TEMP” and “CLOCK” buttons
simultaneously to start up or turn off this heating
function. When this function is started up, “ “ and
“46°F (8°C)” will be shown on remote controller, and
the space will not fall below 46°F (8°C). Press “TEMP”
and “CLOCK” buttons simultaneously again to exit “46°F
(8°C)” heating function.
NOTE
• Under 46°F (8°C) heating function, fan speed is
defaulted at auto speed and it can’t be adjusted.
• Under 46°F (8°C) heating function neither the
temperature nor the fan speed can be adjusted.
“TURBO” will not work either.
• Sleep function and 46°F (8°C) heating function
can’t operate at the same time. If 46°F (8°C) heating
function has been set under heat mode, pressing
the “SLEEP” button will cancel 46°F (8°C) heating
function. If sleep function has been set under heat
mode, initiating the 46°F (8°C) heating function will
cancel SLEEP function.
Press the “WiFi“ button to turn on the WiFi function, the
“WiFi“ icon will be displayed on the remote controller;
Hold the “WiFi“ button for 5s to turn off the “WiFi“
function and the “WiFi“ icon will disappear.
When the unit is OFF, press “MODE” and “WiFi“ buttons
simultaneously for 1s and the WiFi module will return to
the factory settings.
NOTE
• This function is available for the Livo GEN3 models
but may not be available for other models.
Press this button to turn off display light on indoor unit.
“ “ icon on remote controller disappears.
Press this button again to turn on display light. “ “ icon
is displayed.
By pressing this button, you can see indoor set
temperature on indoor ambient temperature on indoor
unit’s display. The setting on remote controller is
selected circularly as below:
Function introduction for combination
buttons
Energy-saving function
Under COOL mode, press “TEMP” and “CLOCK” buttons
simultaneously to start up or turn off energy-saving
function. When energy-saving function is started up,
“SE” will be shown on remote controller, and the unit
will adjust the set temperature automatically, to the
factory setting, to achieve maximum energy savings.
Press “TEMP” and “CLOCK” buttons simultaneously
again to exit energy-saving function.
Loading ...
Loading ...
Loading ...