Loading ...
Loading ...
Loading ...
2 BISSELL.com BISSELL.com 4 BISSELL.com 5
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Do not leave vacuum cleaner when it is plugged in. Unplug from outlet
when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
• Do not use for any purpose other than described in this user guide.
Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as
it should, has been dropped, damaged, left outdoors, or dropped into
water, have it repaired at an authorized service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord,
or pull cord around sharp edges or corners. Do not run appliance over
cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening
blocked; keep openings free of dust, lint, hair, and anything that may
reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
• Turn OFF all controls before plugging or unplugging vacuum cleaner.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in areas where they may
be present.
• Do not use vacuum cleaner in an enclosed space filled with vapors
given off by oil-based paint, paint thinner, some moth-proofing
substances, flammable dust, or other explosive or toxic vapors.
• Do not use to pick up toxic material (chlorine bleach, ammonia, drain
cleaner, etc.).
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes.
• Do not use without filters in place.
• Do not pick up hard or sharp objects such as glass, nails, screws,
coins, etc.
• Use only on dry, indoor surfaces.
• Keep appliance on a level surface.
• Do not carry the vacuum cleaner while it is running.
• Unplug before connecting or disconnecting the Pet TurboBrush® Tool.
• Before using your vacuum, make sure the dirt tank is in locked position
and that all filters, both pre- and post-filters, are in place. DO NOT
operate your vacuum without these filters.
• Plastic film can be dangerous. To avoid danger of suffocation, keep
away from children.
• Do not plug in your vacuum UNTIL you are familiar with all instructions
and operating procedures.
• To reduce the risk of electrical shock, turn power switch OFF and
disconnect polarized plug from electrical outlet BEFORE performing
maintenance or troubleshooting checks.
• Hold plug when rewinding into cord reel. Do not allow plug to whip
when rewinding.
SAVE THESE INSTRUCTIONS
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
COMMERCIAL USE OF THIS MACHINE VOIDS THE MANUFACTURER’S WARRANTY.
READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.
When using an electrical appliance, basic precautions should be observed, including the following:
THIS APPLIANCE HAS A POLARIZED PLUG
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will
fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a proper outlet. Do not change the plug in any way.
Base Wand Hose Crevice Tool Dusting Brush Pet
TurboBrush®
Tool
What’s in the Box?
Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap.
Warranty
Limited 2-year warranty, may vary by state. Visit support.BISSELL.com or call 1-800-237-7691 for
complete warranty information.
WARNING To reduce the risk of injury from moving parts while the vacuum is turned ON, always move the
vacuum via the rolling wheels by using the upper handle at the back of the vacuum. Do not carry the vacuum while it is running.
Always place vacuum on floor with handle in upright position when using tools.
Above Floor Cleaning
Clean hard-to-reach spaces with the Quick Release Extension Wand.
1. Push the release button to
remove extension wand and
attach desired tool.
2. Attach desired tool.
Note: For optimal
performance, attach the Pet
TurboBrush® Tool directly to
the hose instead of the wand.
3. Twist hose counter-clockwise
to remove from handle, if
desired. To do so, twist circular
hose cuff counter-clockwise
and remove from handle.
1. Turn dial on foot to desired height setting. If dial is difficult to
turn, tilt the vacuum back slightly to take the weight off the foot
while turning.
Tip: For best performance, adjust to the lowest practical setting.
If your vacuum is difficult to push, adjust to the next higher
setting.
2. Hold onto the plug and
press automatic cord rewind
button until fully retracted.
If cord doesn’t fully retract on
the first try, pull a little bit of
cord out and press the rewind
button again.
Note: Rotating floor brush continues to rotate while tools are in use. Never place fingers under the
vacuum when it is running. Never place powerfoot on furniture or uneven surfaces.
Certain carpets and low humidity conditions may generate small static discharges. Static discharges
are entirely harmless and are not associated in any way with the main power supply.
Using the Vacuum (continued)
Emptying the Dirt Tank
We have additional tips for maintaining your machine at support.BISSELL.com.
1. Press the tank release
button and pull out to remove
dirt tank.
2. Hold the dirt tank over a
trash bin. Press the bottom
release button to empty.
3. Twist cyclone counter-
clockwise and pull down to
remove from tank.
4. Clean cyclone with warm
water and mild detergent.
Let dry for 24 hours before
reinstalling.
5. Twist cyclone clockwise to
reinstall.
6. Place tank back on vacuum
and press firmly until it clicks
into place.
WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
Cleaning the Pre-Motor Filter
Find replacement filters at BISSELL.com.
1. Press the tank release
button and pull out to remove
dirt tank.
2. Lift release latch to access
filter. Remove foam filter from
lid.
3. Hand wash in warm water
and rinse well; mild detergent
may be used if desired. Let
dry for 24 hours before
reinstalling.
Loading ...
Loading ...