Loading ...
Loading ...
Loading ...
Network Camera User Manual
170
(2) Input the password.
(3) Click Save to save the settings.
Unlock
(1) If you use the memory card on the camera that locks it, unlocking will be
done automatically and no unlocking procedures are required on the part of
users.
(2) If you use the memory card (with a lock) on a different camera, you can go to
HDD Management interface to unlock the memory card manually. Select the
memory card, and click the Unlock button shown next to the Format button.
Then input the correct password to unlock it.
Notes:
• The memory card can only be read and written in when it is unlocked.
• If the camera, which adds a lock to a memory card, is restored to the
factory settings, you can go to the HDD Management interface to unlock
the memory card.
Remove the Lock
(1) Select the Lock Switch as OFF.
(2) Input the correct password in Password Settings text field.
(3) Click Save to save the settings.
4. Set the Arming Schedule and Linkage Method, if you want to receive a
notification when the health status of the memory card is anything other than
good. Refer to Task 2: Set the Arming Schedule for Motion Detection and Task 3:
Set the Linkage Method for Motion Detection in Section 10.1.1.
5. Click Save to save the settings.
Configure Lite Storage
Purpose:
When there is no moving object in the monitoring scenario, the frame rate and
bitrate of the video stream can be reduced to lengthen the storage time of the
Loading ...
Loading ...
Loading ...