Loading ...
Loading ...
Loading ...
Network Camera User Manual
149
Face Capture Advanced Parameters:
Face Exposure: Check the checkbox to enable the object exposure.
Reference Brightness [0~100]: The reference brightness of an object in the object
exposure mode. If an object is detected, the camera adjusts the object brightness
according to the value you set. The higher the value, the brighter the object is.
Minimum Duration [1~60min]: The minimum duration of the camera exposures the
face. The default value is 1 minute.
Note: If the object exposure is enabled, please make sure the WDR function is
disabled, and the manual iris is selected.
Enable object ROI: If the camera captures a face, the object area will be treated as
the region of interest, and the image quality of this area will be improved.
Restore Default: Click Restore to restore all the settings in advanced configuration to
the factory default.
People Counting
Purpose:
People function is used to calculate the number of object entered or exited a certain
configured area and it is widely applied to the entrances or exits.
Notes:
It is recommended to install the camera right above the entrance/exit. To improve
the counting accuracy, make sure your camera is installed horizontally.
Steps:
1. Enter the Counting Configuration interface: Configuration > People Counting.
Loading ...
Loading ...
Loading ...