Loading ...
Loading ...
Loading ...
Before first use
Remove the packaging. Make sure the product is complete and undamaged. Check if all accessories
are present. Do not use the appliance if it is visibly damaged. Contact the service department if
there are any problems.
NOTE!
• Coffee has been used to test the appliance in the factory. Therefore it is completely normal
that there are traces of coffee in the mill.
• Customise the water hardness as soon as possible. Obey the instructions in chapter ‘Set the
water hardness’.
TIP!
To improve the performance of your appliance, we recommend installing a water softener filter. If
your model is not provided with a filter, you can purchase one from the service department.
NOTE!
• Always use clean and cold tap water, bottled water without added minerals or distilled water
suitable for consumption.
• The first time you use the appliance, the water circuit is empty. The appliance could be very
noisy. The noise becomes less when the circuit fills with water.
• The first time you use the appliance, you need to make 4-5 cups of coffee before it starts to
give results that are satisfactory.
• When making the first 5-6 beverages, it is normal to hear the noise of boiling water. This noise
becomes less during use.
• Pull the appliance forward to get access to the main switch, the area for accessories and the
lid of the bean container. Pull the coffee spouts forward to open the service door.
• Use the accessories holder to contain coffee accessories (for example coffee beans).
NOTE!
Read and obey the instructions shown on the display. The display shows information and touch
keys to use. Important information is accompanied by an audio signal.
14
Operation
Loading ...
Loading ...
Loading ...