Loading ...
Loading ...
Loading ...
8 EN
EN
2022 12/2022
USING BLUETOOTH
1. Press the MODE/SHIFT button to select the BLUETOOTH function on the device.
Aflashing “BLUE” message (ready to pair) appears on the LCD.
2. To turn on the Bluetooth function of the device, locate the “SSS3600” unit and enter
0000 if you are asked for apassword. The status message “BLUE” appears on the
LCD (the devices have successfully paired).
3. Press PLAY to start playback.
4. Changing the BT playback source mode disconnects the speaker from the existing
device.
Note:
The Bluetooth function works best within arange of 10 meters with direct visibility.
Attention:
Some connected devices support common volume setting. If some of the
connected devices do not support this feature, the volume setting will operate
separately on each device.
USING THE LINE OUTPUT
1. The function starts automatically by connecting LINE IN to the 3.5mm audio jack
input.
2. Control playback from the audio device.
3. In the LINE IN mode, briefly press PLAY/PAUSE to mute playback and press again to
restore the original volume.
USING THE MICROPHONE/GUITAR PLUG
Microphone input is available in all modes.
1. Connect the microphone to the 6.3mm jack MIC-IN or to the 3.5mm connector MIC.
Connect the guitar to the 6.3mm GUITAR-IN connector.
2. Turning the MIC VOL button on the device, increases or decreases the guitar volume.
Note:
When connecting aguitar to the device, lower the TREBLE knob to the minimum.
Loading ...
Loading ...
Loading ...