Loading ...
Loading ...
Loading ...
8
4 Adding the Door Detector Plus to the Hub
Before you connect door detector plus to the hub, install the DMSS app to your phone. This manual
uses iOS as an example.
●
Make sure that the version of the DMSS app is 1.99.400 or later, and the hub is V1.001.00000005.0
or later.
●
Make sure that you have already created an account, and added the hub to DMSS.
●
Make sure that the hub has a stable internet connection.
●
Make sure that the hub is disarmed.
Step 1 Go to the hub screen, and then tap
Peripheral
to add the door detector.
Step 2 Tap "+" to scan the QR code at the bottom of the door detector, and then tap
Next
.
Step 3 Tap
Next
after the door detector plus has been found.
Step 4 Follow the on-screen instructions and switch the door detector plus to on, and then tap
Next
.
Step 5 Wait for the pairing.
Step 6 Customize the name of the door detector plus, and select the area, and then tap
Completed
.
4.1 Installing the Door Detector Plus
Prerequisites
Before installation, add the door detector to the hub and check the signal strength of the installation
location. We recommend installing the door detector in a place with a signal strength of at least 2
bars.
We recommend using expansion screws when installing the door detector. Make sure to align of
the magnet with that of the door detector during installation, otherwise normal use of the door
detector might be affected.
Procedure
Step 1 Loosen the screw to open the door detector plus.
Loading ...
Loading ...
Loading ...