Loading ...
Loading ...
Loading ...
7
ENG
Beware of hot
surfaces
H will show which cooking
zone is hot to touch. It will
disappear when the surface
has cooled down to a safe
temperature. It can also be
used as an energy saving
function if you want to
heat further pans, use the
hotplate that is still hot.
Locking the Controls
Timer control
To lock the controls
Touch the lock control The timer indicator will show
“ Lo “
To unlock the controls
Touch and hold the lock control for a while.
When the hob is in the lock mode, all the controls
are disable except the ON/OFF
, you can
always turn the induction hob off with the ON/OFF
control in an emergency, but you shall unlock
the hob first in the next operation.
• You can lock the controls to prevent unintended use (for
example children accidentally turning the cooking zones
on).
• When the controls are locked, all the controls except the
ON/OFF control are disabled.
You can use the timer in two different ways:
a. You can use it as a minute minder. In this case, the timer will
not turn any cooking zone off when the set time is up.
b. You can set it to turn one or more cooking zones off after
the set time is up. The timer of maximum is 99 min.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is
turned on.
Note: you can use the
minute minder even if
you’re not selecting any
cooking zone.
Touch “+” the controls
of the timer. The minder
indicator will start flashing
and “10” will show in the
timer display.
Set the time by touching
the “-” or “+” control of the
timer
Hint: Touch the “-” or “+”
control of the timer once to
decrease or increase by 1
minute.
Touch and hold the “-” or
“+” control of the timer to
decrease or increase by 10
minutes.
Touching the “-” and “+” together, the timer
is cancelled, and the “00” will show in the minute display.
When the time is set, it
will begin to count down
immediately. The display
will show the remaining
time and the timer
indicator will flash for 5
seconds.
Buzzer will beep for 30
seconds and the timer
indicator shows “- -” when
the setting time finished.
Setting the timer to turn one or more cooking zones off
Set one zone
Touching the heating zone
selection control that you
want to set the timer for.
(e.g. zone 3#)
Touch timer control, the
minder indicator will start
flashing and “10” will show
in the timer display.
Set the time by touching
the or control of the timer
Hint: Touch the “-” or “+”
control of the timer once will
decrease or increase by 1
minute. Touch and hold the
“-” or “+” control of the timer
will decrease or increase by
10 minutes.
Loading ...
Loading ...
Loading ...