Loading ...
Loading ...
The Front Panel
Auditioning SP6 Sounds
3
GETTING STARTED GUIDE
5. If you are using a mixer and hear distortion, reduce the gain level on the mixer, or use the
mixer’s Pad button if it has one (a button that typically decreases the audio input level by
20dB).
6. After using the SP6, if you are using speakers, turn the master volume all the way down on
your amplier or mixer before powering o the SP6.
Auditioning SP6 Sounds
1. e SP6 starts up in Program Mode. Use the PREVIOUS and NEXT buttons, ALPHA
WHEEL, or CATEGORY buttons to select a dierent Program. See “SP6 Sounds” on
page 11 for more details on selecting Programs or Multis.
1. To hear a Program Demo song for the current Program, press the KEYPAD and ENTER
buttons simultaneously.
2. To hear the capabilities of the SP6, you can play the multi-channel demo songs. Press the
KEYPAD and DRUMS/PERC buttons simultaneously to listen to a multi-channel demo
song.
3. To switch between auditioning Programs or Multis, press the PROGRAM or MULTI
Mode button under the MODE label to the right of the LCD display.
Automatic Power Saving
e SP6 has an automatic power saving feature (Auto Power O) that can automatically power
o the SP6 after a period of inactivity, in order to conserve electricity. e Auto Power O
feature is enabled by default. e default Power O Time is 8 hours, which will cause the SP6
to power o after 8 hours of inactivity.
A count down timer warning will be shown in the LCD display a few minutes before the SP6
is powered o. At any time, touching any SP6 control or playing a note will cause the SP6 to
remain powered on, until the SP6 has been inactive for the set Power O Time.
Auto Power O can be disabled in Global Mode. e Power O Time can also be adjusted in
Global Mode.
Loading ...
Loading ...
Loading ...