Loading ...
Loading ...
Loading ...
ge.com
_JStart/Reset
D
Closeand latchthe dishwasherdoor and selectthe cycle and desiredenhancements. Touch the
START/RESETpadto begin the cycle.The water fill begins immediately, and approximately 60 seconds later
the wash action begins.
When the dishwasher door isfully closed and latched,the control panel lightswill display the last settings
you selected.Ifyou don't want to change any of the settings, siimply touch the START/RESETpad to begin
the cycle.
Ifthe door is closed,the indicator lightswill turn off if the START/RESETpad is not selectedwithin 5 minutes.
Toactivate the display, open and close the door or pressany pad.
DELAY HOURS
RESET
Youcan delay the start of a wash cycle for up to 6 hours. Pressthe DELAYSTART
pad to choosethe number of hours you want to delay the start of the cycle;then
pressSTART/RESET.
The machine will count down and start automatically at the correct time.
NOTE:To cancel the DELAYSTARTselection before the cycle begins,repeatedly pressthe
DELAYSTARTpad until the display is blank.
To change a cycle after washing starts:
Touchthe START/RESETpad to cancel the cycle. TheSTART/RESETlight will flash while
the water is pumped out, if needed.Thistakes approximately 2 minutes.
Time Remaining Display (onsome models)
During operation, the display shows the minutes remaining until the cycle is complete. The display
may adjust the remaining time while the SENSINGlight is on. The time displayed at the start of each
cycle may change from the factory setting as the unit customizes itself to home use.During a delay
start, the display will show hours of time remaining until the cycle starts.
Clean
The CLEANlight is illuminated when the selected cycle and enhancements are complete. The light will
stay ON until a pad is pressedor the door is opened and then closed.
Loading ...
Loading ...
Loading ...