Loading ...
Loading ...
Loading ...
10
ENGLISH
[32] MONO CHANNELS FADERS SECTION
This section allows the levels of the input channels from 1 to 4 to be controlled, and their routing to
the output. Each one of the faders has several control buttons. MUTE button, when pressed, inhibits
the signal to flow to the output bus or main mix paths. The PFL button allows listening to the signal
present on the channel through speakers connected to the CTRL ROOM OUTPUT (see section [11] of
this manual) or through headphones connected to HEADPHONES OUTPUT (see section [7]). MAIN and
BUS 1/2 buttons positioned on the right side of each fader allow the signal to be routed respectively
to MAIN MIX and/or STEREO BUS 1/2.
[33] STEREO CHANNELS FADER SECTION
This section allows the levels of the stereo input channels from 5/6 to 11/12 to be controlled, and their
routing to the output. The PFL button allows listening to the signal present on the channel through
speakers connected to the CTRL ROOM OUTPUT (see section [11] of the panel description) or through
headphones connected to HEADPHONES OUTPUT (see section [7]). MAIN and BUS 1/2 buttons
positioned on the right side of the fader allow the signal to be routed respectively to MAIN MIX and/
or STEREO BUS 1/2.
[34] FX RET FADER
This fader controls the level of the signal coming from the internal PRO DSP FX. MUTE button, when
pressed, inhibits the signal to flow to the output bus or main mix paths. The PFL button allows listening
to the signal present on the channel through speakers connected to the CTRL ROOM OUTPUT (see
section [11] of the panel description) or through headphones connected to PHONES OUTPUT (see
section [7]). MAIN and BUS 1/2 buttons positioned on the right side of the fader allow the signal to be
routed respectively to MAIN MIX and/or STEREO BUS 1/2.
[35] BUS 1-2 FADER
The BUS 1-2 fader controls the level of this stereo bus out. BUS 1-2 can be fed with each one of the
input channels to create a stereo audio group routed to the physical BUS OUTPUTS (see section [9]).
The MUTE button, when pressed, inhibits the signal flow to the BUS output or MAIN MIX paths if BUS
1-2 is routed to it. The MAIN button positioned near to the BUS fader routes the BUS to the MAIN
MIX. The PFL button, when pressed, allows listening to the signal present into BUS through speakers
connected to the CTRL ROOM OUTPUT (see section [11] of this manual) or through headphones
connected to PHONES OUTPUT (see section [7]).
[36] MAIN MIX FADER
The MAIN MIX Fader controls the level of the MAIN MIX.
FRONT PANEL FUNCTIONS
Loading ...
Loading ...
Loading ...