Loading ...
Loading ...
Loading ...
- 4 -
11. Place the machine on a firm and stable surface. Ensure that the machine is
not placed near the edge of the worktop, where it can be easily pushed off or f
all.
12. Always protect the power cable from undue flexing and wearing – do not allow
the cable to hang off edge of the counter or table.
13. To reduce the risk of unintentional starting, check that the control is OFF befor
e plugging the cord into wall outlet. Turn the controller off to disconnect, then
remove the plug from the wall outlet.
14. NEVER plug the machine in where water may flood the area.
15. The ice shaver must be installed correctly before use.
16. The ice tray must be installed well before operating the machine.
17. The use of attachments or parts not specifically recommended or sold by the
manufacturer for this grinder will void the warranty and may cause fire, electri
c shock or injury.
18. DO NOT use the machine for other than intended use. This ice shaver is
intended to be used for commercial and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- by clients in hotels, motels and other residential type environments; bed and
breakfast type environments.
19. The Manufacturer disclaims any responsibility in the case of improper use of t
he machine. Improper use of the machine voids the warranty.
20. DO NOT REMOVE WARNING LABELS FROM THE MACHINE. Doing so
will void the product warranty and may result in serious personal injury.
21. This appliance must be grounded to protect the operator from electrical shock.
This machine uses a grounded, three prong plug that should be connected
directly to a grounded 120V(US)/230V(EC), three prong grounded wall outlet
receptacle. Grounded plugs are used on metal-encased electric appliances to
protect from an electric shock. DO NOT change or alter the plugin anyway.
NEVER break off a grounding prong from a 3-conductor plug. Doing so voids
the warranty and may result in electric shock.
22. Type Y attachment: If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard.
Loading ...
Loading ...
Loading ...